Thursday, June 16, 2011

Bobbin, Not Banging

Trim your headsail just right.



This Double Bobbin Inhauler is made of milled aluminum. It's so strong, you don't have to worry about it deforming under high loads. A continuous splice of 1/4" AmSteel is secured around the bobbin. The splice acts as padding for the deck and mast. It has been designed for boats ranging from 35' to 45' - examples are J/111, Summit 40/King 40, Farr 40, Farr 395, J122, Swan 45, IMX-45. In this case, we're outfitting a J/111.

The bobbin is kind to line; it has a smooth surface that won't point load the line. With proper setup, this J/111 will be able to sustain a 4:1 advantage for ease of adjustment.

No comments:

Post a Comment