Sailing at such a high level all the time wreaks havoc on rigging. For example, Ian estimates all of the Star's running rigging needs to be replaced twice a year, which for them means 2-3 major events including at least 1 week (often times more) of practice leading up to each event... Most of these events take a week or more. To make a long story short - let's just say, this isn’t your grandmother’s rigging.
To be sure all their rigging is up to the task for the big event, Ian worked to put together some control lines, sheets, and running rigging for the boat. Here's what he came up with:
Fine Tune Backstay 5:1 and Checkstay 4:1
Ian used two colors of 1/4" Marlow Excel Fusion, Harken Hardware, and custom made DSL Attachments to make these examples of the Star's control lines. Fusion was chosen because it's easy on the hands. We're not sure if skipper Andrew Campbell wears gloves - but if he goes au naturel, we know why this is a top choice line for him. If feels that good. It also has low stretch, low creep - and is strong.
FSE Robline Dinghy Star was chosen for the jib sheets because it has the lowest stretch available in this diameter line. It's also the most abrasion-resistant. This Star program involves racing in 25 - 30 kts regattas often. These sheets will last 3 or 4 regattas, whereas other line choices would blow out after one. Few lines wear out as quickly as jib sheets on a Star, and these sheets were made with that in mind.
Maffioli DSK-75 Race PC was chosen for the runner tail because of it's low stretch. It also runs really well - it comes off the reel pretty stiff and has less of a tendency to hockle.