Friday, August 10, 2012

How To: Opti Pennant Plug Install

UPDATE: Now with HD video instructions! See below.

You have your shiny new Opti Gold anodized pennant plugs ready to go but just need a little help adding the bling to your race mast.Well of course APS is here to look over your shoulder and critique your every move... or we could just give you a few tips to get it done...

 First run the sail tie through the long open slot on the side of each pennant plug and center the line. 

Next take the plug and place it in the hole with the circular opening on the plug entering last. Allow the line to be pushed in to the mast hole with the plug. Once both plugs have been pushed in take a look down in the mast to make sure the circular openings are lined up with each other. 

Take the wind indicator and seat it in the openings in the plugs on the inside of the mast.

Run the line ends through the open grommet at the top of the Luff of the sail and lash to the mast. 

Go sailing fast.

No comments:

Post a Comment