Wednesday, June 4, 2014

How to Replace Rivets using a Hand Rivet Gun

Rivets are probably one of the most commonly used fasteners on sailboats—they hold bails on masts and booms, spreader mounts, trim, and much, much, more. Unfortunately, rivets don’t last forever (they last pretty darn close though), but in the event that you need to replace one, this video will show you just how easy it is.

Tools Required: 
  • Safety Glasses (safety first!) 
  • Rivet Gun
  • Rivets
  • Caliper/Gauge for Sizing the Hole
  • The Parts That Need to be Riveted (Eyestrap etc)
Here's the play by play from the video:  
  1. Put your safety glasses on! 
  2. With your already drilled holes, slip your unused rivet into the hole, with the part being riveted between the rivet head and the metal that will hold the rivet. 
  3. Change the tip of the rivet gun to fit the rivet
  4. Insert the tip and squeeze the handle. 
  5. After between 2 and 3 pumps, the pin should have pulled out.
  6. Voila! The rivet is set.
Want to learn how a Rivet Gun Works?

No comments:

Post a Comment